Configuring The Transport Stream Control; Setting The Program Number; Setting The Pmt Pid Number; Setting The Audio Pid Number - evertz 7772MFX-HD Manual

6.3.

CONFIGURING THE TRANSPORT STREAM CONTROL

The transport stream configuration is used to set up PID's Number and program number. The PID
number needs to be set when using ASI output for PMT, Video, luminance, video chrominance, audio and
VANC.
The chart below shows the items available in the Transport Stream Control menu.
TSID Program Number
PID Number for
PMTI
PMT
PID Number for
AUDI
Audio
PID Number for
LUMI
Video Luminance
PID Number for
CHRI
Video Chroma
PID Number for
VANI
VANC

6.3.1. Setting the Program Number

Transport Stream Control
TSID
1 to MAX

6.3.2. Setting the PMT PID Number

Transport Stream Control
PMTI
32 to 8191

6.3.3. Setting the Audio PID Number

Transport Stream Control
AUDI
32 to 8191
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder
Set the program number for the transport stream.
Set the Program Map Table PID number.
Set the PID Number to carry all of the audio elements.
Set the PID Number to carry luminance video elements.
Set the PID Number to carry chroma video elements.
Set the PID Number to carry the VANC info.
This control sets the program number when using ASI transmission.
The TSID range is 1 to 9999.
This control selects the PMT (Program Map Table) PID to use in the
transport stream.
The range is from 32 to 8191. The default value is 32.
Note that 32 is the minimum value to avoid any conflict with ATSC
tables.
This control selects the audio PID Number. The 7772MF-HD does not
compress audio.
The audio PID range is from 32 to 8191. The default value is 33.
Revision 1.2
7700 MultiFrame Manual
7772MFX-HD - 15