Selecting The Source For The Headphone Monitoring; Displaying The Module Status; Checking The Module Firmware; Checking Fpga 1 Revision - evertz 7772MFX-HD Manual

7700 MultiFrame Manual
7772MFX-HD JPEG2000 SD & HD Encoder and Decoder

7.5.2. Selecting the Source for the Headphone Monitoring

Headphone Monitor
HSRC
DMX Ch. 1 & 2
DMX Ch. 3 & 4
DMX Ch. 5 & 6
DMX Ch. 7 & 8
DMX Ch. 9 & 10
DMX Ch. 11 & 12
DMX Ch. 13 & 14
DMX Ch. 15 & 16
7.6.

DISPLAYING THE MODULE STATUS

The status menus are used to show the status of various parameters of the 7772MFX-HD. The chart
below shows the items available in the status menu. Sections 7.6.1 to 7.6.6 provide detailed information
about each of the menu items.
UPRV Module Firmware
F1RV FPGA1 Revision
F2RV FPGA2 Revision
F3RV FPGA3 Revision
IVSD Input Video Standard
OVSD Operating Standard

7.6.1. Checking the Module Firmware

Status
UPRV
Eg. "V1.0 BUILD 100"

7.6.2. Checking FPGA 1 Revision

Status
F1RV
Eg. "7"

7.6.3. Checking FPGA 2 Revision

Status
F2RV
Eg. "8"
7772MFX-HD - 28
This selects the audio source for the headphone monitoring.
The parameter can be set to DMX1 to DMX8, and the headphone
DMX1
will be monitoring the incoming embedded audio.
DMX2
DMX3
DMX4
DMX5
DMX6
DMX7
DMX8
Displays the firmware revision of the module.
Displays the FPGA revision of the module's main board.
Displays the FPGA revision of the module's J2K sub-board.
Displays the FPGA revision of the module's audio sub-board.
Displays the detected input video standard.
Displays the operating standard of the module.
The status parameter will report the firmware version that is operating
on the module.
The status parameter will report the revision of FPGA 1 (main board) on
the module.
The status parameter will report the revision of FPGA 2 (J2K sub-board)
on the module.
Revision 1.2