Table of Contents
Advertisement
5.
TECHNICAL DESCRIPTION
5.1.
SPECIFICATIONS
5.1.1. HDTV Serial Digital Video Input
Standard:
1.485 Gb/sec HDTV Serial component digital SMPTE 292M
standards supported shown in Table 2-4
software selectable or autodetect
Connector:
1 BNC per IEC 169-8
Equalisation:
Automatic to 100m @ 1.5Gb/s with Belden 1694 or equivalent cable
5.1.2. HDTV Serial Digital Video Outputs
Standard:
SMPTE 292M, same as input
Outputs:
2 Program video with RP215 Film Ancillary Data embedded and optional Characters
Connectors:
BNC per IEC 169-8
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time: 200ps nominal
Overshoot:
<10% of amplitude
Wide Band Jitter:
< 0.15 UI
5.1.3. SDTV Serial Digital Video Input
Standard:
Serial component 270 Mb/s (SMPTE 259M C)
standards supported shown in Table 2-5
software selectable or autodetect
Connector:
1 BNC per IEC 169-8
Equalisation:
Automatic 300m @ 270 Mb/s with Belden 8281 or equivalent cable
Return Loss:
> 15 dB up to 270 Mb/s
5.1.4. SDTV Serial Digital Video Output
Standards:
Serial component 270 Mb/s (SMPTE 259M-C) same as Input
Connectors:
BNC per IEC 169-8
Outputs:
1 Program with RP201 Three Line VITC
1 Character output with RP201 Three Line VITC and Character Burn-ins
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time: 470ps nominal
Overshoot:
<10% of amplitude
Return Loss:
> 15 dB
Wide Band Jitter:
< 0.15 UI
TECHNICAL DESCRIPTION
9025TR Series Film Footage Encoders Manual
Revision 1.3
Page 5-1
Advertisement
Table of Contents
