Table of Contents
Advertisement
5.3.
UPGRADING FIRMWARE USING KEYLOG TRACKER
Versions 1.4.xx and later of KeyLog Tracker allow firmware upgrades to the hardware directly from within
the Tracker software.
5.3.1. Step 1 – Configuring the unit for Firmware upgrades.
1. Power up the 9025TR unit.
5.3.2. Step 2 – KeyLog Tracker Setup
2. Start KeyLog Tracker
3. Confirm that you have established communications to the 9025TR that you wish to upgrade.
(a green COMM indicator will show at the bottom of the Tracker screen)
4. From the TOOLS menu of Tracker choose the UPGRADE FIRMWARE option. A dialog box titled
Upload 9025 Firmware will appear.
5. Use the BROWSE button to open the file dialog and choose the new firmware file. Typical filenames
will be HS9025_xxxx.BIN for HDSD9025TR and SD9025TR models and EN9025_xxxx.BIN for
HD9025TR models. (xxxx will be the build number of the software). The build version of the firmware
will be shown in the dialog box.
6. Click the UPLOAD button at the bottom of the upgrade dialog. Tracker will begin upgrading the
firmware showing the communications and progress of the upgrade. On successful completion of the
upload the unit should now reboot. After the unit reboots successfully with the new firmware the
'Upload Firmware' dialog will disappear. You can then resume normal operations with the Tracker
software.
TECHNICAL DESCRIPTION
9025TR Series Film Footage Encoders Manual
Revision 1.3
Page 5-4
Advertisement
Table of Contents
