evertz 9025TR Series Instruction Manual page 35

9025TR Series Film Footage Encoders Manual
Press the button to add the 9025TR to the list of controlled devices. Click on the down arrow beside
the Device dropdown and choose the 9025TR with the mouse.
Click on the down arrow beside the Port dropdown and choose the COM port that you connected to the
9025TR. Press the Okay button to add the 9025TR to the list of controlled devices. If you need to add
one of the HD915x or HD915xQ series Afterburners to the controlled devices repeat this procedure,
selecting the correct Afterburner device and COM port. Make sure each COM port selector is set to a
different COM port.
INSTALLATION Page 2-15
Revision 1.3