Table of Contents
Advertisement
5.1.5. Analog Monitor Video Output
Standards:
Analog composite NTSC if input is 525i/59.94
Analog composite PAL if input is 625i/50
Connectors:
BNC per IEC 169-8
Output:
1 Character output with RP201 Three Line VITC and Character Burn-ins
Signal Level:
1 V p-p nominal, internally adjustable
DC Offset:
0V ±0.1V
Return Loss:
>35dB up to 5 MHz
Frequency Response: 0.8dB to 4 MHz
Differential Phase: <0.9°(<0.6° typical)
Differential Gain:
<0.9% (<0.5 % typical)
SNR:
>56dB to 5 MHz (shallow ramp)
Impedance:
75 ohm
5.1.6. LTC Generators
Standard: SMPTE 12M
Frame Rate: Video LTC: 24, 25 and 30 Fps nominal
Audio LTC: 25 and 30 Fps nominal
Connectors: 3 pin male XLR type connector.
Level:
Adjustable, 0.5V to 4.5V p-p
5.1.7. LTC Readers
Standard: SMPTE 12M
Frame Rate: 24, 25 and 30 Fps nominal
Connectors: 3 pin female XLR type connector
Level:
0.2 to 4V p-p, balanced or unbalanced
5.1.8. Serial Remote Control
Standard: RS-232, 57600 baud
Connector:
9 pin female "D"
Control: Computer control of all functions, firmware upgrade
5.1.9. KeyKode Reader Port
Standard: RS-232; 38400 or 9600 baud
Connector:
9 pin female "D"
Protocol: Evertz 5550, 5500 KeyKode Decoder, RIM DigiSync
TECHNICAL DESCRIPTION
9025TR Series Film Footage Encoders Manual
Revision 1.3
Page 5-2
Advertisement
Table of Contents
