Table of Contents
Advertisement
Chapter 8: Displaying the Hardware Status and AlliedWare Plus Version Number
116
Warning
Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord. E3
9. Repeat the procedures in this chapter on the remaining switches that
will be in the stack.
10. If there are no further switches, go to one of the following chapters:
Chapter 9, "Building Stacks with SFP+ Ports S1 and S2" on page
117
Chapter 10, "Building Stacks with Multi-Gigabit Copper Ports" on
page 127
Advertisement
Table of Contents
