Figure 18: Stack Trunks Of Multi-Gigabit Copper Ports For Three Switches; Figure 19: Stack Trunks Of Multi-Gigabit Copper Ports For Four Switches - Allied Telesis x330-52GTX Installation Manual

Chapter 2: Virtual Chassis Stacking
Crossover
50
Crossover
Figure 18. Stack Trunks of Multi-Gigabit Copper Ports for Three Switches
Figure 19. Stack Trunks of Multi-Gigabit Copper Ports for Four Switches
As with the SFP+ ports S1 and S2, the Multi-Gigabit copper ports support
the chain topology, where ports on the top and bottom switches are
unused. Refer to Figure 20 on page 51 for an example. This cable
topology is not recommended because it does not provide trunk link
redundancy.
Straight-through
Straight-through