Dial Pulse Signaling - Vertical Summit80 Manual

Vertical Summit80 & Summit800
Feature Description and Operation Manual

4.6 Dial Pulse Signaling

Description
An analog CO Line can be configured to send dial pulse signals to the central office. If
programmed as a pulse CO line, the system will send open loop pulses at 10 pps with the
assigned break/make ratio.
Operation
System
Operation of this feature is automatic when programmed.
Conditions
1. The break/make ratio is system programmable as 60/40 or 66/33.
2. You can change the signaling from pulse to DTMF by dialing ‗*' while on a Line
assigned for pulse signaling.
Programming
Keyset Admin.
CO/IP
SYSTEM
Web Admin.
CO LINE DATA
SYSTEM DATA
Related Features

Dial Pulse to Tone Switchover

DTMF Signal Sending
Hardware
CO Line Signal Type (PGM 141-Button 5)
Pulse Dial (Break/Make) Ratio (PGM 176)
Pause Timer (PGM 181-Button 10)
Common Attributes Analog AttributesCO Line Signal
Pulse Dial (Break/Make) Ratio
System Timers Pause Timer
314
Issue 1.2