Using And Entering Saved Number Dial; Using System Speed Dial Numbers; Using And Entering Station Speed Dial Numbers - Vertical LDP-9008D User Manual

LDP-9008D & LDP-9030D







4.3.2 Using and Entering Saved Number Dial

You may store the last number dialed on an external call to the
Saved Number Dial buffer for convenient dialing at a later time.
The Saved number is stored until a new number is saved.
To place a call using Save Number Dial:




4.3.3 Using System Speed Dial Numbers

You may, if allowed, use System Speed Dial to call frequently
dialed numbers.
In some cases, these numbers are divided into groups called
System Speed Zone Groups. In this case, you may access
some numbers and not others and your dialing restrictions may
be invoked.
Only an Attendant can assign System Speed Dial numbers.
To place a call using System Speed Dial:



4.3.4 Using and Entering Station Speed Dial
Each station in the Vertical SUMMIT IP is allocated memory for
Station Speed Dial numbers each up to 23 digits. These
Press Soft button,
Speed
Dial *,
or
press the
Redial
Press the Volume up and down buttons to select from the
last 100 numbers dialed or received,
Press the
Send Soft button or
Lift the handset,
Press Soft button,
Speed
Dial #.
Lift the handset,
Press the
speed
Dial the desired System Speed Dial bin number.
Numbers
Soft button,
HOLD
button,
21
/ .
SAVE
User Guide