Vertical Summit80 Manual page 386

Vertical Summit80 & Summit800
Feature Description and Operation Manual
2. Press the desired Flex button.
3. Press the [TRANS/PGM] button.
4. Dial the digits from the Station User Program Code or Fixed Number Plan.
5. Press the [HOLD/SAVE] button.
Conditions
1. The {LOOP} and {POOL} buttons provide a status indication for the call as long as the
station has supervisory control.
2. If there is no available {LINE}, {LOOP} or {POOL} button for a call, the station will not
ring for an incoming outside call; transfers to the station immediately recall the initiator
and recalls are routed directly to the Attendant.
3. A station may have multiple {LOOP} and {POOL} buttons.
4. When all outside Lines in a group are busy, any {POOL} buttons associate with the
group will show busy, otherwise, {POOL} buttons will only display the status of an
activate call.
5. {POOL} buttons will access a Line from the designated group using the Round Robin
or Last Used method as assigned in the database.
6. The priority for the appearance of an outside call transfer is first a direct Line
appearance ({LINE} button), if not available a {LOOP} appearance is employed, if not
available a {POOL} appearance is used. If there is no appearance available, the
transferring station recalls immediately.
7. Station User Program Codes are defined in section 5.25.
Programming
Keyset Admin.
NUMBERING
STATION
Web Admin.
SYSTEM ID &
NUMBERING PLANS
STATION DATA
Related Features

Flexible Numbering Plan

Station User Programming & Codes
Hardware

iPECS IP or LDP Phone
Flexible Numbering Plan (PGM 105~109)
Flexible Button Assignment (PGM 115)
Flexible Numbering Plan
Flexible Buttons
375
Issue 1.2