Speakerphone/Headset/Handset; Speed Dial; Transfer; Blind Transfer - Vertical IP2007 User Manual

Speed Dial

Speakerphone/Headset/Handset

There are 3 major input/output devices on this phone. To switch between these devices,
follow the audio path transitions described below:
Handset to Handsfree -- You are using the handset and want to switch to handsfree
talking. Press the SPEAKER button, then place the handset on hook. NOTE: The voice will
not switch to speakerphone until you place the handset on hook.
Handset to Headset -- You are using the handset and want to switch to the headset.
Press the HEADSET button, then place the handset on hook. NOTE: The voice will not
switch to headset until you place the handset on hook.
Handsfree to Handset -- You are using handsfree talking and want to switch to the
handset. Lift the handset off hook and the voice will switch to handset immediately.
Handsfree to Headset -- You are using handsfree talking and want to switch to the
headset. Press the HEADSET button, the voice will switch to headset immediately.
Headset to Handset -- You are using the headset and want to switch to handset. Lift
the handset off hook and the voice will switch to handset immediately.
Headset to Handsfree -- You are using the headset and want to switch to handsfree
talking. Press the SPEAKER button and the voice will switch to speakerphone
immediately.
Speed Dial
Speed Dialing allows you to store frequently dialed numbers. You can preset 10 speed
dial numbers for fast dialing. Use the following steps to use speed dial:
1. Lift the handset.
2. You will see "SPD" on the LCD menus. Press the soft key corresponding to the LCD
menus display.
3. You will see "SpeedDial:_" on the LCD display. Enter a valid speed dial bin number
(0-9) and the IP phone will dial out with the number that is preset in the IP phone.
Phone & Web Access
» Phone Menu = Left soft key to CONFIG >
» Web Menu = Login > Personal tab > Speed Dial Entry Settings

Transfer

Transfer redirects a connected call. You can use a Blind or Supervised transfer method to
transfer the call to an extension or an outside phone number.

Blind Transfer

While on a call:
1. Press the TRANSFER key to transfer the call.
2. Dial the desired phone number and the call will transfer automatically.
3. Hang up to release the line.
Xcelerator IP Administrator Manual
Chapter 4 - Phone Features
key > arrow to 13. Speed Dial
4-11
March 2007