Table of Contents
Advertisement
Vertical Summit80 & Summit800
Feature Description and Operation Manual
To delete the current CLI Message
1. Press the ―*‖ button, the next CLI message is displayed.
To delete all CLI Messages
1. Press the [SPEED] button.
2. Press the ―*‖ button twice.
To return a call to the current CLI Message
1. Press the [HOLD/SAVE] button.
Conditions
1. The total number of Message Wait indications in queue for the system is 1000. Should
the message Wait buffer fill, the buffer full message, as below will be output over the
RS-232 port.
2. ―Warning: Message Wait Buffer Full.‖
3. The CLI Message Wait display includes the date, time, message count and caller Id.
The count is the number of attempts by a specific calling party with the time and date
from the most recent attempt.
4. The CLI Message Wait status is stored in non-volatile memory to protect against power
loss.
5. When an outside call is assigned to ring multiple stations, or a group, CLI Message
Wait is not provided.
6. When an outside call with CLI is routed to an ACD/Terminal/Circular station group, the
CLI Message Wait will be provided to the last station notified of the call before the call
was abandoned.
7. Once a call is answered by a station in the system, CLI Message Wait is no longer
available i.e.; transferred calls do not provide CLI Message Wait.
8. A CLI Message Wait indication is left at the originally called station even if the call is
forwarded to another station.
9. While idle, the user may toggle between CLI number and CLI name, if available, by
pressing the [TRANS/PGM] button.
10. The CLI and called station number will be shown in the SMDR record as an
abandoned or lost call.
11. For ISDN calls, the CLI Message Wait will display and dial the number as shown in the
Table below, modified based on assignments in PGM 200 for:
Incoming Prefix Code
My Area Code
My Prefix Area Code
International Access Code
292
Issue 1.2
Advertisement
Table of Contents
