Vertical Summit80 Manual page 188

Vertical Summit80 & Summit800
Feature Description and Operation Manual
―LDT Index‖ will make each entry unique. The system will use the lowest matching
entry.
4. When Direct CO LCR is used on an ISDN line, an ISDN information message with the
Called party Info Element, which includes only the numbering plan and numbering type,
is sent to the ISDN to maintain the ISDN connection while the user finishes dialing and
the system modifies the digits.
5. For Direct CO LCR, the number of digits for the LDT Table should be programmed
considering the dial-tone time-out of the network.
6. Since an outside Line is connected, Direct CO LCR does not support the Alternative
DMT index, which allows the system to select a second or alternative outside Line to
place the call.
7. If the LCR CO group is not assigned, the system will not seize an outside Line and will
make internal call.
8. If the LCR CO group is assigned as the unused group, the system it will seize an
outside Line according to the station attributes.
9. The system selects the LDT main index from {LDT Table Index} of Common
Attributes(111) and the system compares the dialed data with {Compared Digits} of
sub index tables which have same {LDT Zone number} with {LDT Zone number} of
Common Attributes(111).
Programming
Keyset Admin.
TABLES
Web Admin.
STATION DATA
TABLES DATA
Related Features

Outside Line Access

Outside Line Groups

ISDN (Integrated Service Digital Network)

Station Flexible Buttons
Hardware
LCR Control Assignment (PGM 220)
LCR LDT Table (PGM 221)
LCR DMT Table (PGM 222)
LCR Table Initialization (PGM 223)
Common Attributes LDT Table Index
LCR Control Attributes
LCR LDT
LCR DMT
LCR Table Initialization
177
LDT Zone Number
Issue 1.2