Vertical Summit80 Manual page 361

Vertical Summit80 & Summit800
Feature Description and Operation Manual
To activate ICR Call Forward:
1. Lift the handset or press the [SPEAKER] button to receive a dial tone.
2. Press the [FWD] button.
3. Dial the desired Call Forward code (0-4).
4. Dial ―587‖, the Station ICR code.
5. Replace the handset, return to idle.
To activate/deactivate a Profile from your phone:
1. Activate ICR Call Forward
2. Press the [TRANS/PGM] button and dial ―26‖, the Call Profile menu
Or Log in to the Station Web portal.
3. Select the Call Profile Table desired (―0‖: ICR or ―1‖-―3‖: Call Profile 1-3).
To change Call Profile while away from your phone:
1. Call to iPECS System (DISA CO Line).
2. Dial ―#‖ to access your Voice Mailbox.
3. Enter your Station Number and Authentication code.
4. Dial ―7‖ to set call forward
5. Enter ―1‖ to set Station Call forward.
6. Enter ―Station ICR Code‖.
7. Enter ―Call Profile Number‖ (0: ICR Forward, 1-3: Call Profile 1-3).
Conditions
1. Call Profile Routing is available on digital and IP Lines only and is applied to outside
calls that are routed to your phone as a Transfer, DID or DISA call. Calls that are
assigned to Ring to your phone are not subject Call Profile Forward.
2. The conditions associated with Station ICR apply to Call Profile Routing.
3. It is recommended hunt group is set last call profile destination.
Programming
Keyset Admin.
STATION
SYSTEM
Web Admin.
STATION DATA
SYSTEM DATA
Related Features

Call Forward

Station ICR
Hardware

iPECS IP or LDP Phone
Call Forward (PGM 111-Button 2)
Station Call Forward No Answer Timer (PGM 123-Button 1)
System Call Forward No Answer Timer (PGM 181-Button 1)
Common Attributes Call Forward
Station Timer Station Forward No Answer Timer
System Timers Call Forward No Answer Timer
350
Issue 1.2