Table of Contents
Advertisement
Vertical Summit80 & Summit800
Feature Description and Operation Manual
2. Dial the Call Forward feature code ―554‖.
3. Dial the Remote Forward code ―0‖
4. Dial the station's Authorization Code (Station and Password),
5. Dial the Forward condition (―1‖~―4‖)
6. Dial the destination station, station group, or dial CO access code (9, 8xx, 88xx) and
desired external phone number.
7. Momentarily press the hook-switch and receive confirmation tone.
8. Replace handset return to idle.
To deactivate the Call forward
1. Lift the handset and receive stutter dial-tone,
2. Dial the Call Forward feature dial code ―554‖,
3. Dial ―#‖ to cancel Call Forward.
Conditions
1. A station receiving a forwarded call can transfer the call to the forwarding station.
2. A station, denied the use of Call Forward, will receive error tone in response to
attempts to activate Call Forward.
3. A forwarded intercom call will signal the receiving station in the Tone Signaling mode,
regardless of the Intercom Signaling Mode at the station.
4. You cannot forward calls to a station in DND and, if attempted, error tone is returned.
5. Attempting activation of Call Forward will automatically deactivate any activate Display
Text Message or DND status at your phone. Active Call Back or Queue requests are
not canceled.
6. When Call Forward is active, you can make outgoing calls (internal or external) but
cannot activate a Call back or Queue request.
7. Your private lines calls will forward if the receiving station has a direct appearance
button for the Private line or if you forward to a Voice Mail group.
8. For outside calls, manually activated Call Forward will override any Preset Call
Forward assignment.
9. You may forward calls to the integrated Voice Mail without recording a greeting, in
which case, calls still forward to your Mailbox but callers receive the "No
announcement recorded" message before they can leave a voice mail.
10. Call Forward status is maintained in the system's non-volatile memory for protection
from power outage.
11. A station in a Station Hunt Group (ACD, Circular or Terminal) can be assigned to
receive incoming hunt calls, overriding any Call Forward. That is, the system
recognizes the Forward condition and but routes hunt calls to the station based.
12. Off-Net Call Forward of incoming outside calls is essentially an automated DISA call
that establishes an Unsupervised Conference. Such calls are subject to the conditions
of a DISA call and Unsupervised Conference, and may require entry of an
Authorization Code.
13. Off-Net forward calls are not answered by the system until the system completes
dialing of the external call. The caller is then connected to the outgoing call.
58
Issue 1.2
Advertisement
Table of Contents
