Table of Contents
Advertisement
Vertical Summit80 & Summit800
Feature Description and Operation Manual
Operation
iPECS IP & LDP Phones
To record a Company Directory Name
1. Dial the ―563‖, the Company Directory Name record code.
2. Dial ―1‖ to record your Name.
3. After recording prompt, say your name.
To delete Company Directory Name
1. Dial the [Record VM Subscriber Name] flexible number.
2. Dial 2 to delete the Name recording
SLT
To record a Company Directory Name
1. Dial ―563‖ the Company Directory Name record code flexible number.
2. Dial 1, to record your Name.
3. After the recording prompt, say your Name.
To delete Company Directory Name
1. Dial ―563‖, the Company Directory Name record code.
2. Dial 2 to delete the Name recording
To use Company Directory Feature
1. In response to the system announcement, the caller dials the Company Directory index.
2. The system plays the First/Last name selection prompt
3. The caller selects first or last name entry
4. The system plays the enter 3-character prompt
5. The caller dials the first three characters of the desired station user.
6. The System plays Name Greeting for each match (maximum 9).
7. If there is a single match, the called is transferred. If multiple matches exist, the system
plays prompts for each with a selection digits below:
―for [subscriber name], press 1‖
―for [subscriber name], press 2‖
...
―for [subscriber name], press 9‖
8. When the caller enters the desired digit, the system routes the caller to that station
Conditions
1. To be searched in company directory, the Station user name must be recorded and the
first and last name also must be programmed properly.
144
Issue 1.2
Advertisement
Table of Contents
