Off-Hook Signaling - Vertical Summit80 Manual

Vertical Summit80 & Summit800
Feature Description and Operation Manual
5.14

Off-Hook Signaling

Description
When you receive a call while you are on an active call, you will receive the assigned Off-hook
signals. For ICM calls, a Camp-On, Voice-Over Announcement or Off-hook ring signal may be
received. For outside calls, you will receive a muted ring or a single tone burst. This signal is
delivered to the iPECS IP or LDP Phone speaker. SLTs will only receive camp-on tones.
Operation
System
Operation of Off-hook ring signals is automatically controlled.
Conditions
1. While using the speakerphone, a Camp-On tone is provided over the speaker in place
of the assigned Off-hook ring Signal.
2. Activating DND or One-Time DND places the station in DND, terminating any Off-hook
signaling.
3. Off-hook ring signals terminate when the call forwards or is answered, or abandoned.
4. A station, which is receiving Off-hook ring signals, will receive normal ring upon return
to idle status.
Programming
Keyset Admin.
CO/IP
SYSTEM
Web Admin.
CO LINE DATA
STATION DATA
SYSTEM DATA
Related Features

Call Waiting/Camp-On

Outside Line Ring Assignment

DND (Do Not Disturb)
 DND – One-Time DND
Hardware

iPECS IP or LDP Phone
CO Line Ring Assignment (PGM 144)
Off-Hook Ring Type (PGM 161-Button 1)
CO/IP Ring Assignment
Common Attributes Off-Hook Ring Type
System Attributes Off-Hook Ring Type
363
Issue 1.2