Co Transit-In - Vertical Summit80 Manual

Vertical Summit80 & Summit800
Feature Description and Operation Manual
Programming
Keyset Admin.
SYSTEM
Web Admin.
NETWORKING DATA
Related Features

Call Forward

Authorization Codes (Password)

DND (Do Not Disturb)

DND - One Time DND

Direct Inward System Access (DISA)

Unsupervised Conference

Dialing Restrictions

Station Groups

Station Speed Dial

System Speed Dial

Intercom Signaling Mode

Call Forward, Preset
Hardware

2.79.2.9 CO Transit-In

Description
When a DID call is received by a networked system, the system will attempt normal DID call
routing. The ICLID table is examined, followed by the MSN table, then the defined DID number
conversion is completed. The system does a look-up in the Flexible DID Table to identify the
destination. If the number is a station in a networked system, the system routes the call to the
destination over the appropriate network connection with CLI provided to the called station.
Operation
Operation of Distributed Networking is automatic when configured
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Net Basic Attributes
Net Supplementary Attributes
Net CO Line Attributes
Net Numbering Plan
249
Issue 1.2