Vertical Summit80 Manual page 77

Vertical Summit80 & Summit800
Feature Description and Operation Manual
Operation
iPECS IP & LDP Phones
To assign a {PICK UP GROUP CALL PICK-UP} button
[TRANS/PGM] + {FLEX} + ―588‖ + [HOLD/SAVE]
To Pick-up a call ringing at another station in the same Call Pick-up group
1. Lift the handset or press [SPEAKER] button.
2. Dial ―588‖, the Pick-Up Group Call Pick-up feature code.
Or, Press the {PICK UP GROUP CALL PICK-UP} button.
SLT
To Pick-up a call ringing at another station in the same Call Pick-up group
1. Lift the handset.
2. Dial ―588‖, the Pick-Up Group Call Pick-up code.
Conditions
1. Pick-Up Group Call Pick-up applies to stations within the same Pick-up Group and
does not apply to other types of Station Groups where Group Call Pick-up may be
used.
2. To pick-up an outside call, you must have an idle appearance button available.
3. When several calls are ringing simultaneously, Call Pick-up will connect the oldest
highest priority call (Ringing Line Preference, PGM 173 or System Data Ringing Line
Preference Priority).
4. Queue callback and Private Line calls are not subject to Call Pick-up and such
attempts receive error tone.
5. Hands free announced intercom calls cannot be picked up by another station. Only
ringing intercom calls are subject to Call Pick-up.
6. When a station belongs to multiple Pick-up Groups, calls to the group with the lowest
number are answered first.
7. A Station must have ―Pick up by Button‖ enabled to use a Flex button for Pick-up
Group Call Pick-up.
Programming
Keyset Admin.
STATION GROUPS
STATION
SYSTEM
Web Admin.
STATION GROUP
DATA
STATION DATA
Pick Up Group (PGM 192-Button 1)
Pick up by Button(PGM 114-Button 20)
Ringing Line Preference Priority (PGM 173)
Station Group Assignment Group Type, Pick-Up Attribute
Common Attributes Pick-Up by Flex Button
66
Issue 1.2