Table of Contents
Advertisement
Vertical Summit80 & Summit800
Feature Description and Operation Manual
Conditions
1. An iPECS IP or LDP Phone user may cover for an SLT or other stations. However,
since a Flex button is required, an SLT cannot provide coverage for other stations.
2. When off-hook or in DND, the covering station will only receive a visual indication of
the call from the LED of the {CALL COVERAGE} button and display, no off-hook ring
is provided.
3. The {CALL COVERAGE} button will provide an appearance for Lines that do not
appear on the covering station except for Private Lines. To cover for Private Lines, the
covering station must have an appearance and be allowed access to the Private Line.
4. Call Coverage attributes can be assigned either by the covered station user or in the
system database.
5. A station cannot provide call coverage for a station to which it is linked.
Programming
Keyset Admin.
STATION
Web Admin.
STATION DATA
Related Features
Hardware
Call Coverage Enable (PGM 111-Button 12)
Call Coverage Delay Ring (PGM 111-Button 13)
Call Coverage On Busy (Web PGM 111, OFF/ON)
Call Coverage Through Mobile Ext (Web 111-113 , OFF/ON)
Call Coverage On Busy Range (Web 111-113, External Call
Only/ External and Internal Call)
Call Coverage Delay Ring Method (Web 111-113, by
Originator/by Member)
Call Coverage For Wakeup Ring (Web 111-113, OFF/ON)
Call Coverage Ring Type on Member (Web 111-113,
Silence/Normal Ring)
Common Attributes Call Coverage Mode, Call Coverage
Delay Ring, Call Coverage On Busy, Call Coverage Through
Mobile Extension, Call Coverage On Busy Range, Call
Coverage Delay Ring Method, Call Coverage For Wakeup
Ring, Call Coverage Ring Type on Member
217
Issue 1.2
Advertisement
Table of Contents
