Vertical Summit80 Manual page 172

Table of Contents

Advertisement

Vertical Summit80 & Summit800
Feature Description and Operation Manual
4. The Mobile telephone number to notify is assigned in PGM 236.
5. The system will continuously attempt to seize an outside Line for the notification call
until successful, if all lines in the assigned Line group are busy.
6. The Retry counter is incremented after the system accesses the outside Line for
notification.
7. The Retry count is from 1 to 9; the retry interval is from 1 to 3 minutes.
8. If a new message is logged before answer of the notification call, the message will be
available to the user and a new notification is not invoked. If a new message is
received after answering the notification call, the System will invoke another notification
call. The user will receive the notification after returning to idle.
9. An analog CO Line may be used for the notification however, notification over these
Lines (LCO Lines) must be enabled and several timers must be set to compensate for
the lack of answer and disconnect signals from an analog CO Line. The system will
treat the call as answered after VM Notify Play Delay Over LCO Timer then play the
new message prompt. The system will wait for you to enter a password for the VMIB
Group Dial Time Out. You must enter the correct password or the call will be
disconnected.
10. If you enter an incorrect password, the system will allow you to reenter a correct
password. You may retry entry for the DISA Retry Counter.
Programming
Keyset Admin.
TABLES
SYSTEM
Web Admin.
TABLES DATA
SYSTEM DATA
STATION GROUP
DATA
Related Features
Mobile Extension
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
Hunt Call Enable (PGM 236-Button 6)
VSF Notify (PGM 236-Button 7)
Notify Retry Count (PGM 236-Button 8)
Notify Retry Interval (PGM 236-Button 9)
VM MEX Notify over LCO (PGM160-Button24-13)
Notify Play Delay (PGM181-Btn18)
Mobile Extension Table Hunt Call Enable, VSF/VMIM
Notify, Notify Retry, Retry Interval
System Attributes VM Notify to Mobile Extension over CO
System Timers VM Notify Play Delay Over CO Timer
Station Group AttributesVSF Group Attributes Dial Time
Out
161
Issue 1.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summit800

Table of Contents