Table of Contents
Advertisement
Vertical Summit80 & Summit800
Feature Description and Operation Manual
iPECS IP & LDP Phones
To register wake-up time alarm from a Station, perform the following steps:
1. Press the [TRANS/PGM] button.
2. Dial ―41‖, the code for setting the Wake-up Alarm.
3. Enter the Wake-up alarm index number, ―1 to 5‖.
4. Dial the desired 2-digit hour (24-hour mode), then 2-digit minute for alerting.
5. Enter Repeating type, ―1‖ to ―4‖.
6. For the one-time alarm (repeating type 1), enter the date for the alarm as 2 digits for year,
month and day of the month.
7. Press the [HOLD/SAVE] button.
To erase a wake-up time from a Station, perform the following steps:
1. Press the [TRANS/PGM] button.
2. Dial ―42‖.
3. Enter Wake-Up alarm index number, ―1‖ to ―5‖.
4. Press the [HOLD/SAVE] button.
To stop the alarm notification
1. Lift the handset or press the [SPEAKER] button.
SLT
To register Wake-Up
1. Lift the handset.
2. Dial ―561‖, the SLT Programming code, confirmation tone is heard.
3. Dial ―41‖, the set Wake-up code.
4. Dial the 2-digit hour and 2-digit minute for alerting.
5. Enter Repeating type, ―1‖ to ―4‖.
6. For the one-time alarm (repeating type 1), enter the date for the alarm as 2 digits for year,
month and day of the month.
7. Hook-flash, conformation tone is provided.
To stop the alarm notification
1. Lift the handset.
To erase Wake-Up
1. Lift the handset.
2. Dial ―561‖, the SLT Programming code, confirmation tone is heard.
3. Dial ―42‖, the erase Wake-up code.
4. Enter Wake-Up alarm index number, ―1‖ to ―5‖.
5. Hook-flash, a conformation tone is provided.
269
Issue 1.2
Advertisement
Table of Contents
