Leaving A Message Wait; External Calls; Placing External Co/Voip Calls - Vertical LDP-9008D User Manual

LDP-9008D & LDP-9030D
If you are the Attendant or Secretary, you may activate
Intrusion. You may also use Step Call; dial the next station
by dialing the last digit of the Intercom number.
To Camp-On (wait off-hook) for a busy station:

To request a Callback (wait on-hook) for a busy
station:

To make a Voice Over announcement to a busy
station:



4.1.2 Leaving a Message Wait

If the called user does not answer or is in DND mode, you may
leave a Message Wait. The called user will receive a
Message Wait indication; the message will be displayed in the
LDP-9000 Series phone. If the ring/message LED is set to
Message Wait Indication, the ring/message LED will flash.
To activate Message Waiting:


4.2 External Calls

4.2.1 Placing external CO/VoIP calls

External calls are placed on CO/IP lines. These ‗lines' are
accessed either using a button on the Phone assigned as a
CO/IP line or using dial codes. The CO/IP lines are grouped
for different types of calls, local, long distance, etc. Using the
CO/IP line group code, you will be able to access any line
from the group. A Flex button on the Phone assigned as a
LOOP
for access to CO/IP lines are:
Press * and await an answer.
Press the
MSG
hang-up.
Dial #,
After the Splash tone is heard, begin speaking.
Press the MSG button and hang-up.
button lets you access a line from a group. Dial codes
soft button or the
17
button and
C B
ALL ACK
User Guide