Using Prime Co Instead Of Intercom With Modem Or Fax - Vertical comdial DX-120 Installation And Maintenance Manual

DX-120 Installation and Maintenance Manual

Using Prime CO Instead of Intercom with Modem or Fax

SOLUTION: ANALOG PRIME LINE—SETTING UP A PRIME LINE FOR A FAX
CONNECTED TO AN ANALOG PORT USING CO LINE 4.
Place Line 4 (803) into CO Group2 (740)
From the Fax Machine
1) Remove the receiver from the hook.
2) Dial 740 (be sure you are accessing line 4).
3) Dial a valid number.
NOTE
You must dial out on that line /(line group) before programming the hot line (dial
800 for line 1, 801 for line 2, 802 for line 3 etc....).
4) Program a System Speed dial bin with a pause.
• To do this, you can use PCDBA (see below) or program using the phone (see next page).
Use PCDBA to Program the System Speed Dial Bin with a Pause
5) Go to the DX-120 PC-DBA System Resource SPD. No. Programming Tenant 1screen in PCDBA.
6) Choose a system speed dial bin (DIR#s 500-699), and insert a P for pause in its SPD. No. field.
OR
Place Line 4 (803) into CO Group2 (740) from the Fax Machine (continued on next page)
T
ROUBLESHOOTING
- 127 -
I ISSUES
NSTALLATION