Gira 2100 Series Manual page 82

instabus KNX/EIB System
Sensor
Acting on...
When a channel (X = 1 to 2) of the pushbutton interface is used as output
Output X
Function of output X
82/82 Page 2100-xx/2101 xx
basic stage heating
additional stage heating
1-bit actuating variable basic
stage heating
1-bit actuating variable basic
stage cooling
1-bit actuating variable basic
stage heating and cooling
1-bit actuating variable additional
stage heating
1-bit actuating variable additional
stage cooling
1-bit actuating variable additional
stage heating and cooling
output of external switching
object
Defines the actuating variable by which the
underfloor heating is addressed.
When channel 1 or channel 2 of the pushbutton
interface are used as outputs, they can output
optionally an actuating variable of the room
temperature controller or the value of an
external switching object
If the actuating variable of the room temperature
controller is to be output, this variable must be a
switching variable (PWM or 2-state).
07 /17
Subject to change without notice