Table of Contents
Advertisement
Function:
Controller extension:
Object-Nr.
Function
52
Setpoint shift feedback
53
Setpoint shift preset
Function:
Controller status indication additional stage
Object-Nr.
Function
57
Status report additional stage
Function:
Actual temperature not adjusted
Object-Nr.
Function
58
Actual temperature not
adjusted
Independent of the setting of the parameter "Temperature sensing" (internal sensor, external sensor or
internal and external sensor), the function shows the non-adjusted (and non-weighted) actual value of the
internal temperature sensor.
1: Optionally, the "T" flags can be set for the operating mode switch-over. Once the flags are set, the object
values which have changed according to the newly set operating mode will be actively transmitted to the
bus.
2: This object is only visible in mixed operation "heating and cooling" or "basic / additional heating / cooling".
The "T" flag is set for automatic heating / cooling switch-over.
3: This object is only visible when additional stage is activated.
07/17
Subject to change without notice
Name
RTC output
RTC input
Name
RTC output
Name
RTC output
instabus KNX/EIB System
Sensor
DPT–ID
Type
6.010
1 byte
6.010
1 byte
DPT–ID
Type
---
1 byte
DPT–ID
Type
9.001
2 byte
2100-xx/2101 xx Page 19/82
Flag
C, T, R
C, W
Flag
C, T
Flag
C, T
Advertisement
Table of Contents
