Gira 2100 Series Manual page 76

Continuous regulator / object regulator
Hide thumbs Also See for 2100 Series:
Table of Contents

Advertisement

instabus KNX/EIB System
Sensor
Only if function = dimming
Control
Time between switching
and dimming, base
Time between switching
and dimming, factor (4 ...
127)
Behaviour on return of bus
voltage
Increase brightness by
Reduce brightness by
Transmit stop telegram
Telegram repetition
Time between two
telegrams, base
Time between two
telegrams, factor (3 ... 127)
Only if function = blind/shutter
Command on rising edge
Behaviour on return of bus
voltage
76/82 Page 2100-xx/2101 xx
one-surface control
darker/brighter (TOGGLE)
two-surface control
brighter (ON)
two-surface control
darker (OFF)
two-surface control
brighter (TOGGLE)
two-surface control
darker (TOGGLE)
130 ms
260 ms
520 ms
1 s
4 ... 127, 4
no reaction
transmission of ON telegram
transmission of OFF telegram
100 %
50 %
...
1.5 %
100 %
50 %
...
1.5 %
no
yes
no
yes
130 ms
260 ms
520 ms
1 s
3 ... 127, 10
no function
UP
DOWN
TOGGLE
no reaction
UP
DOWN
Defines the reactions in case of a sustained or a
brief press. A sustained press sends dimming
telegrams whereas a brief press sends
switching telegrams.
With "brighter/darker" and with "TOGGLE", the
internally stored state will be changed and
transmitted on the next press.
Time after which the function assigned to a long
key-press (dimming) is executed.
Defines whether and what kind of information
will be transmitted after return of bus voltage
Determines the maximum step width of a
dimming telegram. A dimming telegram can
increase the brightness by X % maximum.
Determines the maximum step width of a
dimming telegram. A dimming telegram can
reduce the brightness by X % maximum.
A release of the key transmits one or no stop
telegram.
Cyclical repetition of a dimming telegram during
a key-press.
Time between two telegrams when telegram
repetition is selected.
After this time, a new dimming telegram will be
sent.
Only if telegram repetition = "yes".
Defines the command transmitted when a
make-contact button is pressed.
Defines whether and what kind of information
will be transmitted after return of bus voltage
07 /17
Subject to change without notice

Advertisement

Table of Contents
loading

This manual is also suitable for:

2101 series

Table of Contents