Gira 2100 Series Manual page 80

instabus KNX/EIB System
Sensor
Only with temperature value transmitter
Transmit value on
Value on rising edge
Value on falling edge
Behaviour on return of bus
voltage
Value change by long press NO
Time between two
telegrams
base
Time between two
telegrams
factor (3 ... 127)
Only with brightness value transmitter
Transmit value on
Value on rising edge
Value on falling edge
Behaviour on return of bus
voltage
80/82 Page 2100-xx/2101 xx
rising edge (key as make
contact)
falling edge (key as break
contact)
rising and falling edge (switch)
0 °C ... 40 °C, 20 °C
0 °C ... 40 °C, 18 °C
no reaction
reaction as with rising edge
reaction as with falling edge
transmission of current input
state
YES
130 ms
260 ms
520 ms
1 s
3 ... 127, 3
rising edge (key as make
contact)
falling edge (key as break
contact)
rising and falling edge (switch)
0 lux, 50 lux, ... 1500 lux,
200 lux
0 lux, 50 lux, ... 1500 lux,
0 lux
no reaction
reaction as with rising edge
reaction as with falling edge
transmission of current input
state
Defines whether telegrams are to be transmitted
when a key is pressed and / or released.
Defines the values transmitted after the above
type of actuation.
Defines whether and what kind of information
will be transmitted after return of bus voltage
Pressing the key for at least 5 s will cause the
current value to be cyclically reduced by the
fixed step width (1 K) and to be transmitted.
After releasing the key, the previously
transmitted value remains stored.
This parameter defines whether a value
adjustment is possible.
Time between two telegrams when telegram
repetition is selected.
A new dimming telegram is transmitted
whenever this time elapses.
Only if "Value adjustment by long press" = "yes"
Defines whether telegrams are to be transmitted
when a key is pressed and / or released.
Defines the values transmitted after the above
type of actuation.
Defines whether and what kind of information
will be transmitted after return of bus voltage
07 /17
Subject to change without notice