Table of Contents
Advertisement
Only with light-scene extension without storage function
Transmit light-scene
number on...
Light-scene on rising edge
(1 ... 64)
Light-scene on falling edge
(1 ... 64)
Behaviour on return of bus
voltage
Only with light-scene extension with storage function
Transmit light-scene
number on...
Light-scene on rising edge
(1 ... 64)
Light-scene on falling edge
(1 ... 64)
Behaviour on return of bus
voltage
Storage function only?
Time of a long press for
storage
base
Time of a long press for
storage
factor (9 ... 127)
07/17
Subject to change without notice
rising edge (key as make
contact)
falling edge (key as break
contact)
rising and falling edge (switch)
1 ... 64, 1
1 ... 64, 1
no reaction
reaction as with rising edge
reaction as with falling edge
transmission of current input
state
rising edge (key as make
contact)
falling edge (key as break
contact)
1 ... 64, 1
1 ... 64, 1
no reaction
reaction as with rising edge
reaction as with falling edge
transmission of current input
state
NO
YES
130 ms
260 ms
520 ms
1 s
9 ... 127, 10
instabus KNX/EIB System
Sensor
Defines whether telegrams are to be transmitted
when a key is pressed and / or released.
Defines the values transmitted after the above
type of actuation.
Defines whether and what kind of information
will be transmitted after return of bus voltage
Defines whether telegrams are to be transmitted
when a key is pressed and / or released.
Defines the values transmitted after the above
type of actuation.
Defines whether and what kind of information
will be transmitted after return of bus voltage
In the basic setting, the input distinguishes
between a brief press (recall of the scene) and
a long press (storage of the scene)
If only the storage function is desired, a brief
press alone is sufficient to store the scene.
Defines the time the channel must be activated
so that the telegram for scene storage will be
transmitted.
Depending on previous parameter.
2100-xx/2101 xx Page 79/82
Advertisement
Table of Contents
