instabus KNX/EIB System
Sensor
Object controller
The continuous-action controller is also available without control elements. This variant is called object
controller. This means that the object controller has no status LEDs (B - I) no presence key (A) and no control
knob (J). The room temperature controller and pushbutton interface functions are however the same as in the
continuous-action controller. The room temperature controller function of the object controller is operated
exclusively by means of telegrams via the bus.
(The object controller has other article nos. and similar ETS search paths.)
Illustration:
Object controller
2/82 Page 2100-xx/2101 xx
Dimensions:
Width: 60 mm
Height: 60 mm
Depth: 50 mm
Overall device
dimensions depending
on design variant.
Controls / terminals:
–
07 /17
Subject to change without notice