Acs800-31/U31 Specific Parameters In The Igbt Supply Control Program; Terms And Abbreviations; Parameters; System Ctr Inputs - ABB ACS800-31 Hardware Manual

ACS800-31/U31 specific parameters in the IGBT Supply
Control Program
The signals and parameters of the IGBT Supply Control Program which are specific
to the ACS800-31 and ACS800-U31 are described in the tables below. These
parameters need not be set in a normal start-up. For more information on
parameters of the IGBT Supply Control Program, refer to
Control Program Firmware Manual

Terms and abbreviations


Term
B
C
Def.
FbEq
I
R
T.

Parameters


Name/Value
No.
16 SYSTEM CTR
INPUTS
START MODE
16.15
LEVEL
EDGE
[3AFE68315735 (English)].
Definition
Boolean data type
Character string data type
Default value data type
Fieldbus equivalent: the scaling between the value shown on the control panel
and the integer used in serial communication
Integer data type
Real data type
Data type (see B, C, I, R)
Description
Parameter lock, parameter back-up etc.
Selects the start mode.
Starts converter by level of control command. Control
command is selected by parameter 98.01 COMMAND SEL
and 98.02 COMM. MODULE.
WARNING! After a fault reset, the converter will
start if the start signal is on.
Starts converter by EDGE of control command. Control
command is selected by parameter 98.01 COMMAND SEL
and 98.02 COMM. MODULE.
Actual signals and parameters 109
ACS800 IGBT Supply
T./FbE Def.
q
B EDG
E
0
1