Materials
Drive enclosure
Package
Disposal
Applicable standards
•
EN 60204-1:2018
•
EN 60529:1991
+ corrigendum May
1993
+ A1:2000
•
EN 60664-1:2007
•
EN 61800-3:2004
•
EN 61800-5-1:2007
+A1:2017
•
UL 508C
•
NEMA 250-2003
•
CAN/CSA C22.2
No. 14-18
•
CSA C22.2 No. 274-17
• PC/ABS 2.5 mm, color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2 mm, thickness of coating
100 micrometers
• extruded aluminum AlSi
Cardboard, plywood, PP bands (straps), PE plastic
The drive contains raw materials that should be recycled to preserve energy
and natural resources. The package materials are environmentally
compatible and recyclable. All metal parts can be recycled. The plastic parts
can either be recycled or burned under controlled circumstances, according
to local regulations. Most recyclable parts are marked with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and
printed circuit boards can be landfilled. The DC capacitors (C1-1 to C1-x)
contain electrolyte and the printed circuit boards contain lead, both of
which are classified as hazardous waste within the EU. They must be
removed and handled according to local regulations.
For further information on environmental aspects and more detailed
recycling instructions, please contact your local ABB distributor.
The drive complies with the following standards.
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements.
Provisions for compliance: The final assembler of the
machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems. Part 1:
Principles, requirements and tests.
Adjustable speed electrical power drive systems. Part 3: EMC requirements
and specific test methods
Adjustable speed electrical power drive systems - Part 5-1: Safety
requirements - Electrical, thermal and energy
UL Standard for Safety, Power Conversion Equipment, third edition
Enclosures for Electrical Equipment (1000 Volts Maximum)
Industrial control equipment
Adjustable speed drives
Technical data 131