Actual Signals And Parameters; What This Chapter Contains; Trol Program; Terms And Abbreviations - ABB ACS800-31 Hardware Manual

Actual signals and parameters

What this chapter contains

This chapter contains listings of parameters specific to the ACS800-31 and
ACS800-U31.
Line-side converter actual signals and parameters in the
motor-side converter control program
This section describes the actual signals and parameters of the line-side converter
control program which are copied to the motor-side converter control program. The
user can view two actual signals (by default, measured line current and intermediate
circuit DC voltage) and change the values of the copied parameters without
changing the control panel between two control boards and programs. In normal
use, there is no need to set these or other parameters of the line-side converter
control program. For more information on the parameters, refer to
Supply Control Program Firmware Manual

Terms and abbreviations


Term
Actual signal
Def.
FbEq
Parameter
Definition
Signal measured or calculated by the drive. Can be monitored by the user.
No user setting possible.
Default value
Fieldbus equivalent: The scaling between the value shown on the control
panel and the integer used in serial communication.
A user-adjustable operation instruction of the drive.
Actual signals and parameters 107
12
[3AFE68315735 (English)].
ACS800 IGBT