External +24 V power supply for the RMIO boards via terminal X34 149
18
External +24 V power supply for
the RMIO boards via terminal
X34
What this chapter contains
This chapter describes how to connect an external 24 V power supply for the RMIO
boards of the motor-side and line-side converters via terminal X34. For current
Motor control and I/O board (RMIO)
consumption of the RMIO board, see
(page 91).
Note: For the motor-side converter RMIO board, external power is easier to supply
Motor control and I/O board (RMIO)
via terminal X23, see
(page 91).
Parameter settings
In Standard Control Program, set parameter 16.09 CTRL BOARD SUPPLY to
EXTERNAL 24V if the RMIO board is powered from an external supply.