Fault tracing
What this chapter contains
This chapter describes the fault and warning messages displayed on the control
panel and the LEDs of the drive. For a detailed description of the fault and warning
messages, see the appropriate firmware manual.
Faults and warnings displayed by the CDP 312R control
panel
The control panel displays the Warning and Fault messages of the unit (that is, line-
side converter or motor-side converter) the panel is currently controlling.
In addition, the panel indicates the active warnings and faults in the unit that is not
currently being controlled. The information between the units is delivered through a
separate serial communication channel.
An active warning or fault state in the line-side converter (ID:2) is indicated by
flashing messages WARNING, ID:2 or FAULT, ID:2 on the control panel display when
the panel controls the line-side converter.
To display the warning or fault identification text, switch the control panel to view
the line-side converter as described in
Information on warnings and faults concerning the line-side converter are described
ACS800 IGBT Supply Control Program Firmware Manual
in
FAULT, ID:2
ACS 800 0490_3MR
*** FAULT ***
LINE CONV
(FF51)
Control panel
Fault tracing 117
14
(page 104).
[3AFE68315735 (English)].