78 Electrical installation
Connecting the control cables
Lead the cable through the control cable entry (1).
Connect the control cables as described below. Connect the conductors to the
appropriate detachable terminals of the RMIO board [refer to
board (RMIO)
(page 91)]. Tighten the screws to secure the connection.
Terminals
Control panel
Optional module 1
Control cable
grounding: see
360-degree
grounding
(page 79).
View of frame size R6
Optional module 2
DDCS communication module: RDCO
Channel CH1 is used for the internal
communication between the line-side
and motor-side converters.
Detachable connection terminals
(pull up)
1
Motor control and I/O