Table of Contents
Advertisement
82 Electrical installation
In the example below, one AIMA-01 I/O module adapter is connected to the RMIO
boards of the line-side and motor-side converters.
RMIO board of
the line-side
converter *)
RDCO
CH0
*) WARNING! In frame size R6, you must remove the top cover to reach the RMIO board.
Read and follow the
structions can cause injury or death.
For more information, see
(3AFE68295351 [English]).
Connecting a PC to the motor-side RMIO board
Connect the PC to channel CH3 of the RDCO module in the motor-side converter
using a fiber-optic cable and a suitable adapter.
Make sure that you connect the PC to the correct RMIO board. For the locations of
the RMIO boards on the drive, see
For more information on the RDCO module, see
Communication Option Modules
RMIO board of
the motor-side
converter
RDCO
CH1
Safety instructions
(page 11) in this manual. Ignoring the safety in-
AIMA-01 I/O Module Adapter User's Manual
Product overview
(3AFE64492209 [English]).
AIMA-01 I/O
module
adapter
.
(page 24)
RDCO-01/02/03 DDCS
Advertisement
Table of Contents
