Electrical installation 71
Note: When the capacitors of EMC filter +E202 or +E200 are disconnected, the EMC
CE marking
Directive requirements in the second environment are not fulfilled. See
(page 132).
Units of frame size R6
Remove the two screws shown below.
Note: Depending on the EMC filter type and the nominal voltage of the drive, there
may be only one screw.
View of frame size R6
Note: When the capacitors of EMC filter +E202 are disconnected, the EMC Directive
requirements may not be fulfilled in first environment, but are fulfilled in the second
environment.
When the capacitors of EMC filter +E200 are disconnected, the EMC Directive
CE marking
requirements in the second environment are still fulfilled. See
(page 132).