Updating The Software; Establishing A Connection To The Router - Teldat Regesta Smart PRO Installation Manual

Teldat S.A.

4.7 Updating the software

The Regesta Smart PRO router is equipped with the capability to update to new releases. For detailed information on
the latest updates, we recommend contacting your distributor.
To update one of our routers, there are multiple methods available. For comprehensive instructions, please refer to
the "Teldat Dm 748-I Software Updating " manual.
When it comes to updating one of our routers, the required software is provided in a distribution format. This includes
a single file that contains all the necessary files for updating your device, along with detailed information on their con-
tent.
The Regesta Smart PRO router incorporates independent modules for the Wireless WAN interface. You have the
flexibility to choose modules from different manufacturers or opt for multiple modules from the same provider, de-
pending on the technology being used. In most cases, the firmware is separate from the software. To ensure the cor-
rect upgrade, please consult your distributor for the appropriate UPGRADE file specific to your Wireless WAN mod-
ule as outlined in the "Teldat Dm781-I Cellular Interface " manual, which provides step-by-step guidance on module
upgrades.

4.7.1 Establishing a connection to the router

There are two available methods to access the device's Command Line Interface (CLI):
4.7.1.1 Connecting via the local console (CONF connector)
The Regesta Smart PRO offers a convenient RJ.45 female connector called CONF. on its front panel, allowing ac-
cess to the device's local console. To configure this feature, connect the CONF. port to an asynchronous terminal or
a PC with terminal emulation software.
To establish a connection with the configuration port, use the RJ45 cable (included with the router) along with the fe-
male RJ45-female DB9 adapter provided. If the terminal relies on DB25 connectors, an additional adapter will be ne-
cessary.
Connecting for configuration
Fig. 18:
Regesta Smart PRO
• Via the CONF connector.
• Utilizing the Telnet protocol.
• Speed: 115200 bps.
• Eight data bits.
• One stop bit.
• No parity bit.
• No type of flow control.
4 Connecting the Router
31