Appendix A Technical Information; Troubleshooting; Updating The Software; Connecting With The Router - Teldat K Seres Installation Manual

Teldat S.A.

Appendix A Technical Information

A.1 Troubleshooting
Below, you will find a table that will help you solve problems during the installation of the router. If you cannot solve
the problem, please ask your distributor for additional information.
Symptom
None of the LEDs lights up on
the router.
You have forgotten the access
password for the router.
The LAN Switch LED never
lights up in green.
The Eth WAN LED never lights
up in green.
The Wi-Fi LED never lights up in
green.
The USB LED never lights up in
green.
A.2 Updating the software
The Teldat K family can be updated to new releases. Please consult your distributor for further details on new re-
leases.
There are various ways to update a Teldat router: please see the software upgrading manual (" Teldat-Dm 748-I Soft-
ware Updating") for further information.
The software required to update Teldat routers is supplied in a format known as distribution. This consists of a
single file which contains all the files needed to update your device, as well as in-depth information on the content.
A.3 Connecting with the router
As the router doesn't have a console in order to access the CLI, you need to carry out the following instructions given
below.
For the first connection, you need to access the router via telnet using address 192.168.1.1. This is the address es-
tablished in the Ethernet0/0 interface in the default configuration used to boot the router.
The connection is carried out through the Switch, which has the Ethernet0/0 interface.
If the router is a Teldat K with a 1-GE-LAN license, then the connection is via the WAN as the LAN will be inactive
and the WAN becomes the Ethernet0/0.
Teldat K/KF router
Solution
Check the power supply to the router (power source, ON/OFF switch, main power
outlet).
Ignore the configuration by using the RST button (as explained in the relevant sec-
tion).
Check the Ethernet cable and the connection to the network.
Check the appropriate license is available for its use.
Check the Ethernet cable and the connection to the network.
Check the configuration for your device and that for the remote station(s).
Check the appropriate license is available for its use.
Check that the device inserted in the USB connector is supported by the router.
Please check the Teldat website http://www.teldat.com to view the list of suppor-
ted 3G USB modems.
Check the appropriate license is available for its use.
Technical Information
19