Appendix A Technical Information; Troubleshooting; Updating The Software; Establishing A Connection To The Router - Teldat M2 Series Installation Manual

Edge router
Hide thumbs Also See for M2 Series:
Table of Contents

Advertisement

Technical Information

Appendix A Technical Information

A.1 Troubleshooting
If you encounter any problems during installation, please refer to the table below for troubleshooting tips. If the issue
persists, we recommend contacting your dealer for further assistance.
Symptom
None of the LEDs on the router
are lighting up.
You have forgotten access
password for the router.
The LAN connector LED fails to
light up.
The WAN connector LED fails to
light up.
The Wi-Fi LED fails to light up in
green.
A.2 Updating the software
The Teldat M2 router is equipped with the capability to update to new releases. For detailed information on the latest
updates, we recommend contacting your distributor.
To update a Teldat router, there are multiple methods available. For comprehensive instructions, please refer to the
"Teldat Dm748-I Software Updating " manual.
When it comes to updating a Teldat router, the required software is provided in a distribution format. This contains all
the necessary files for updating your device, along with detailed information on their content.
A.3 Establishing a connection to the router
A.3.1 Connecting via the local console (AUX connector)
The Teldat M2 router family offers a convenient RJ45 female connector called AUX on its front panel, allowing ac-
cess to the device's local console.
AUX Connector
Fig. 25:
28
Solution
Verify the power supply to the router, including the power source, ON/OFF switch,
and main power outlet.
Ignore the configuration through the RST button (as described in the appropriate
section).
Inspect the Ethernet cable and the network connection.
For more detailed instructions, please refer to the "Teldat Dm709-I LAN
Interfaces" manual.
Inspect the Ethernet cable and the network connection.
Ensure that the appropriate license is available for use.
For more detailed instructions, please see the "Teldat Dm709-I LAN Interfaces"
manual.
Verify the configurations of both the router and the remote station(s).
For further information, please see the "Teldat Dm771-I WLAN Interfaces" manual.
Teldat
Teldat M2/M2L

Advertisement

Table of Contents
loading

Table of Contents