Table of Contents
Advertisement
Teldat S.A.
Appendix A Technical Information
A.1 Troubleshooting
The following table can help you solve problems when installing the device. If you cannot resolve the issue, please
contact your dealer for more information.
Symptom
None of the LEDs light up on
the router.
You have forgotten the router's
access password.
The LAN connector LED never
lights up.
The WAN connector LED never
lights up.
A.2 Updating the software
The RS300 router can be updated to new versions. Please contact your dealer for further details on new releases.
There are several ways to update a Teldat router. For further information, please see manual: "Teldat Dm748-I Soft-
ware Updating" .
The software required to update Teldat routers is supplied in a format known as distribution, which contains all the
files needed to update your device and in-depth information on their content.
The embedded access point (if available) can also be updated to new versions. Please contact your dealer for further
details on new releases for the embedded access point.
A.3 Connecting to the device
A.3.1 Connecting using the local console (AUX connector)
The RS300 router has a RJ45 female connector on the front panel, known as AUX, which provides access to the
device's local console.
AUX Connector
Fig. 19:
To configure this, you must connect the Aux port to an asynchronous terminal (or to a PC with terminal emulation).
RS300 Series
Solution
Check the power supply to the router (power source, ON/OFF switch, main power
outlet).
Ignore the configuration through the RST button (as explained in the relevant sec-
tion).
Check the Ethernet cable and the connection to the network.
For further information, please see manual: "Teldat Dm709-I LAN Interfaces" .
Check the Ethernet cable and the connection to the network.
Check the appropriate license is available for use.
For further information, please see manual: "Teldat Dm709-I LAN Interfaces" .
Technical Information
19
Advertisement
Table of Contents
Need help?
Do you have a question about the RS300 Series and is the answer not in the manual?
Questions and answers