Table of Contents
Advertisement
4 Connecting the Router
Chapter 4 Connecting the Router
This chapter provides a detailed guide on connecting the Regesta Smart PRO router to Ethernet devices and net-
works. Within this chapter, you will find the following sections:
4.1 Power source
Note
Before connecting the router, we kindly ask you to carefully read and follow the instructions provided
below.
4.1.1 Power connector pins
The power connector is located on the connector panel of the router.
Power Supply Connector
Fig. 8:
Depending on the model, the Regesta Smart PRO can be DC or AC-powered.
Note
Please ensure that the power input of your device is compatible with your power supply.
The power connector on this router is a 2-wire 5.08 mm pitch terminal block.
The connector is equipped with 2 terminals for both AC power (in the AC version or AC-powered MR version) and
20
•
Power source
on page 20
•
Data connections
on page 22
•
Installing the SIM card
on page 27
•
RST button
on page 29
•
Troubleshooting
on page 30
•
Updating the software
on page 31
Teldat S.A.
Regesta Smart PRO
Advertisement
Table of Contents
Need help?
Do you have a question about the Regesta Smart PRO and is the answer not in the manual?
Questions and answers