Calibrating The Color Density - Oki PRO330S User Manual

Calibrating the color density

This section describes the procedure to calibrate the density from the operator panel.
1
Check that "READY TO PRINT" appears on the display.
2
Press « ∧ » or « ∨ » several times to display [CALIBRATION], and then
press «OK».
3
Press « ∨ » once to display [ADJUST DENSITY/EXECUTE].
4
Press «OK».
5
When "READY TO PRINT" appears on the display, it indicates that the
process is completed.
- 65 -