Print Head; Capping Unit; Heater - Oki IP-5620 Quick Reference Manual

Print head

Capping unit

Wiper blade
It removes foreign matters
on the surface of the
nozzles of the print head.

Heater

This printer is equipped with three heaters for ink fusing and image quality stabilization.
24
Head up down mechanism
By lowering the lever, the print
head position rises by 0.5mm.
Capping unit
It prevents the nozzles of the
print head from drying.
Front
Carriage
Print head
Media
After heater
Dries ink to stabilize print quality.
* These three heaters are controlled independently.
Rear
Media feed direction
Paper guide(rear)
Preheater
Preheats the media.
Print heater
Make the ink penetrate into the
media to fuse the ink.