F Wiper Blade Cleanliness Check And Replacement - Oki IP-6620 User Manual

F Wiper blade cleanliness check and replacement

Replace the wiper blade in the following cases.
- When a printer message prompts you to do so.
- When you notice that the blade is not clean or damaged during a daily inspection.
Follow the procedure below to replace the wiper blade.
Always replace the 3 blades at the same time.
1
PRINTER READY
01: PAPER / 1626mm
2
MAINTENANCE
2
START MAINTENANCE
3
MAINTENANCE
2 WIPER MAINTENANCE
4
>WIPER MAINTENANCE
2 REPLACE BLADE
5
>>REPLACE BLADE
OK?
6
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
7
OPEN COVERS AND
REPLACE WIPER BLADE
, ,
Press the MAINTENANCE button.
Press the Down button to select WIPER
MAINTENANCE.
Press the OK button.
Press the Up and Down buttons to select
REPLACE BLADE, and then press the OK
button.
Press the OK button to start the operation.
To cancel the operation, press the CANCEL button.
Open the front cover, and then the capping
unit cover.
119
Maintenance