Device Setup - Proxim Edge MP-1035-CPE Device Management Manual

4.2 Device Setup

Wizard guides the user through initial device installation.
Click Wizard on the left navigation pane, configure the parameters and click Finish to complete the setup and reboot the
device automatically. Parameters modified in the Wizard applies to the existing configuration of the device.
Wizard Operations tab controls device operational modes:
1. Topology option allows to select if the device will be used in Point to Point or Point to Multipoint mode.
Default Topology setting is Point to Point mode.
2. Radio Mode option allows to select if the device will be used in Base Station (BSU) or Subscriber (SU) mode.
Default Radio Mode will be BSU-EPA if topology is set to Point to Point.
Default Radio Mode will be SU if topology is set to Point to Multipoint.
3. If Point to Multipoint / BSU are selected and supported Number of SUs is 1, then Upgrade License menu is displayed. It
is then recommended to upgrade license to increase Number of SUs to 32.
Device Management Guide
Graphical User Interface Overview
23