Proxim Edge MP-1035-CPE Device Management Manual page 43

For single radio devices, no tabs are displayed at the top of the screen for admin user and for spectrum analyzer advanced
user, only Interface 1 tab will be displayed.
Spectrum Analyzer consists of the following:
•
Channel Scan Time: Enter the time (ranging from 1000 to 60000 milliseconds) to scan each channel.
•
Low Frequency Filter & High Frequency Filter: Enter the start and stop frequency filter values to limit the number
of channels to scan.
Click OK and then click Start to continuously scan all the available channels within the vicinity of the device.
The Spectrum Analyzer plots the channel utilization and Avg. SNR for each channel. Channel utilization is calculated as ratio
of counter values (Medium found free) / (Medium Tested for Free) and Avg. SNR is calculated as ratio of (Sum of RSSI values of
frames received) / (Number of Frames received). The newest data shows up on the right and scrolls to the left over time. The
user can scroll through the graph for the specific values of each parameter at that specified place.
Device Management Guide
Figure 6-6 Spectrum Graph (Admin and Monitor User)
Figure 6-7 Spectrum Graph (Advanced User)
Tools
43