5.9.2 Debug Log
Debug Log helps you to debug issues related to important features of the device. Currently, this feature supports only DDRS
and DFS. This feature helps the engineering team analyze the issues and provide a faster solution. This feature should be used
only in consultation with the Proxim Customer Support team. Once logging is enabled, the Debug Log file can be retrieved via
HTTP or TFTP.
To enable Debug Log, navigate to Monitor > Logs > Debug Log.
Features: Select the appropriate features to be logged. The available features are Select All, DDRS Level 1, DDRS Level 2,
DDRS Level 3 and DFS.
File Status: It displays the current size of the Debug Log file.
After selecting the parameters, click OK.
To delete the Debug Log, click Clear Log. To get the updated status of the Debug Log File, click Refresh.
: Debug log is applicable only to point-to-point and point-to-multipoint devices.
5.9.3 Syslog
When you enable the Syslog Status in a device, the Syslog Log Section displays all the Syslog events generated by the device.
Syslog messages will be shown based on the configured Log and Priority levels.
•
Device Management Guide
Figure 5-1 Debug Log
Device Management
39